WUXI KAILONG PHARMACEUTICAL MACHINERY CO.,LTD.

GDD-Ⅲ Computerized Filling Machine

　　This machine is a newly made liquid filling machine. It works with a rolled extruding pump controlled by a computer, and is applicable for fixed volume(less than 1000ml per bottle) liquid filling such as medicament, beverage, liquor, oil, flavoring, cosmetics and reagent etc.
Characteristic：
1）No toxin or smell: the pipe circulating system of this machine is just composed of a single silicone tube with no toxin or smell.
2）Easy cleaning: just put the liquid entering mouth of the silicone tube into disinfectant solutions and clean it when the whole pipe circulating system needs to be disinfected and cleaned.
3）Easy change of filling liquid: just change silicone tube to change filling liquids and with no cross contamination brought about.
4）Easy change of filling volume: just press key to reset it.
5）Automatic filling repeat: set cool time at will and start automatic filling repeat.
6）Data storage: all the set data on filling volume, cool time and error correction are stored and will not be lost even without power supply.
7）Light and small with great convenience: just put this machine on a small desk and the raw liquid barrel on the ground near the desk and filling can be finished.
Special advantages of this machine:

1）Volume indication: directly adopting ml instead of time as measurement, which makes filling easy to be noticed.
2）Tubes with two different diameters: silicone tubes of two different diameters are prepared to meet the needs of different filling volumes and speed.
3）Minor errors: it is equipped with a computerized speed measurement device, which can automatically correct errors caused by voltage fluctuation.
4）Easy correction of errors: just enter the measured filling volume and the compute will automatically correct the errors.
5）Indication of accumulated filling bottles: automatically indicate the accumulated filling bottles at the mode of repeat filling.
6）Low noise: precisely made with top grade bearings it has low working noise.
7）With high stability and reliability: rare malfunction with strong anti-interference capability.
8）With high safety: all the running parts are confined to avoid finger or hair hurting.
Technical specification:
Filling speed: 24ml per min for silicone tube of 16mm;
8ml per min for silicone tube of 11mm.
Error of filling volume: less than 1%.
Rated power supply: 220V±10%;50Hz±4%
Power: about 100 W.
Dimensions: 440mm(L)×260mm(B)×180mm(H)
Weight: about 12Kgs.
Pressure: 4.2 Kgs per cm².
Max. continuous pumping volume: 86.4 Kgs per hour.